Burst Flexible Hose? Melbourne’s Trusted Plumbing Team
We fix burst braided hoses, mixer tap leaks, and ezy hooker failures—fast, clean and with care. Servicing Melbourne homes 7 days a week.
Understanding Flexible Water Hoses: Small Part, Big Risk
At Detect and Repair, we specialise in detecting and repairing leaking or burst flexible water pipes across Melbourne.
Our licensed plumbers don’t just patch a problem—we assess the root cause, make a lasting repair, and help protect your plumbing system from future failures.
Flexible water connectors—also known as ezy-hookers, braided hoses, mixer tap tails, or stainless steel flexible hoses—are the small, silver hoses found under your kitchen sink, bathroom vanity, laundry trough or behind your toilet.
These hoses are designed to connect your taps to your water supply and are usually made of rubber with an outer stainless steel braid. They’re flexible, compact, and widely used in modern plumbing installations.
But here’s the issue:
Despite being common, they’re also one of the most frequent causes of sudden water damage in Australian homes. Over time, the inner rubber core degrades, or the external steel weave can fray and fail—causing sudden pipe bursts, often under pressure.
💡 Did You Know?
Most flexible water connectors are rated to last around 5–10 years, yet many homes still have hoses well beyond their expiry—often unnoticed until it’s too late.
The Hidden Weak Point in Melbourne’s Household Plumbing
Why Do Flexible Water Connectors Leak or Burst?
Flexible hoses might look tough—but underneath the braided steel exterior is a rubber core that can wear out, split or burst over time. And because these hoses are often out of sight (under sinks or behind cabinets), most homeowners never notice an issue—until water is gushing onto the floor.
Here are the most common reasons we find leaking or burst flexible water pipes across Melbourne homes:
Common Causes of Failure:
🕒 Age & Expiry
Most braided hoses are rated for 5–10 years. After that, the rubber begins to perish, even if no visible wear is present.
💧 Water Pressure Surges
A sudden spike in water pressure—or ongoing pressure that’s too high—can rupture old or poor-quality hoses, especially at the crimped ends.
🚿 Mixer Tap Leaks
When mixer taps drip or develop internal leaks, they often cause slow and constant pressure on the connector tails beneath, leading to fatigue and failure.
🔊 Water Hammer (Banging Pipes)
This shockwave effect caused by sudden valve closure puts repeated stress on hose joints, which weakens them over time.
🌡️ Heat & Steam Exposure
Hoses installed under sinks near dishwashers, ovens, or boiling water taps often deteriorate faster due to constant temperature extremes.
🔧 Incorrect Installation
Over tightening, twisting, or using low-quality fittings during install or renovation work is a major risk factor for premature failure.
🌿 Rust & External Damage
If moisture collects around the braided steel, corrosion can silently eat through the mesh—especially in laundry or bathroom areas.
⚠️ Key Message:
These hoses rarely drip—they burst, and when they do, water can flow at full mains pressure. A failed flexible hose can release litres per minute and flood your home in under an hour.
🔍 What to Look For:
- 🧵 Fraying of the braided steel mesh
- 🔩 Rust or discolouration near the joints
- 🔄 Twisted or kinked hose near the tap tail
- 💦 Signs of moisture, mould, or leaks underneath cabinetry
- 🧯 A sudden spray or full burst—usually under pressure
Not Just a Quick Fix—A Complete Plumbing Solution
Anyone can swap out a broken hose—but that’s not how we do things. When you call us about a leaking tap, burst flexible hose, or mixer tap leak, we follow a proven process that gives you long-term confidence, not just a temporary fix.
Our Process: Detect – Repair – Protect:
🔍 Step 1: Detect the True Cause
We don’t just replace what’s broken—we inspect your entire connection setup. That includes checking for water hammer, excessive pressure, corrosion, or tap design flaws that may have triggered the failure.
Many “simple” hose leaks are symptoms of bigger problems—we pick them up during this inspection stage.
🔧 Step 2: Repair with the Right Materials
We use premium-grade hoses rated to Australian standards (AS/NZS 3499), fitted correctly to avoid future twists, overtightening, or premature wear. Whether it’s a dripping tap, mixer tap tail replacement, or a burst braided hose, we do it cleanly, quickly, and correctly.
🛡️ Step 3: Protect Against Future Failures
After repair, we offer practical advice on preventing the next issue. That might include:
- Installing pressure-limiting valves
- Replacing hoses over 5 years old
- Addressing poor workmanship from past renovations
- Adding water hammer arrestors if needed
We don’t upsell—we simply help you avoid repeat plumbing disasters.
Get the Plumber you deserve!
Why Melbourne Homeowners Choose Us for Flexible Hose & Tap Leaks
Leaking taps, burst braided hoses and water spraying under the sink—these problems always feel urgent. But that doesn’t mean they should be rushed or treated like a one-size-fits-all job.
We take the time to fix it properly, so you don’t end up in the same situation six months later.
✅ What Sets Us Apart
Here’s why homeowners across Melbourne trust us with their leaking tap repairs and flexible water pipe bursts:
🛠️ Specialist Diagnosis
We investigate the why behind every failure, not just the obvious damage. That means fewer call-backs and smarter solutions.
🚿 All Tap & Hose Types Covered
From old two-piece shower taps to modern mixer taps with flexible tails—we service and replace all setups.
🔧 Clean, Lasting Repairs
We use high-quality, compliant hoses, fixings, and fittings—no cut corners, and no cheap imports.
📍 Local Melbourne Experts
We know the suburbs, the water systems, the older builds and the fast-developing ones. We’ve fixed tap bursts everywhere from Box Hill to Brighton, Eltham to Elsternwick.
💬 Clear Pricing & Advice
You get transparent pricing before we begin, and honest options—without pressure.
🧯 Preventative Insight
We’re not just here to react. We show you how to protect your plumbing system for the future.
Our reputation is built on care, trust and doing the job right—not just ticking the box. That’s why we’re called out again and again by Melbourne families who want plumbing handled with attention and respect.
Your Melbourne Service
Don’t Wait for the Flood – Know the Signs Before a Hose Bursts
Don’t Wait for the Flood – Know the Signs Before a Hose Bursts
Flexible water hoses rarely give you a second chance. In most cases, failure is sudden and severe.
But there are subtle signs—if you know what to look for. Catching these early could save you thousands in water damage.
🚨 Common Red Flags That Mean Trouble Is Coming:
🧵 Fraying or Loose Braiding
If the stainless steel mesh looks frayed, kinked, or has tiny broken wires—it’s time to replace it.
💧 Moisture Under the Sink or Vanity
Dampness, swelling cabinetry, or unexplained puddles can all indicate a slow flexible pipe leak.
🔩 Rust or Discolouration at Hose Ends
Corrosion around the fitting joints means the inner rubber core may be deteriorating — and a burst could be imminent.
🚿 Dripping Mixer Tap or Tap Tail
A leaking tap can apply constant internal pressure to the hose tails underneath—leading to fatigue or rupture.
🔊 Banging or Vibrating Pipes (Water Hammer)
This pressure shock often stresses hose fittings—especially in older or poorly installed plumbing.
📉 Low Water Pressure in One Tap
A partially ruptured hose or kinked connector can restrict flow to your mixer tap.
🕒 Age Over 5 Years
If your flexible hoses are over 5 years old and haven’t been inspected, they’re considered at-risk—even if they look fine.
“Don’t wait for water to come pouring through the ceiling or flooding your kitchen”
We can assess, repair, and protect in one visit—often before things turn critical.
Trusted Tap & Hose Leak Repairs Across Melbourne’s South East, Bayside and Peninsula
Our licensed plumbers service homes and businesses throughout Inner South East Melbourne, greater metro suburbs, and Mornington Peninsula regions, providing trusted burst pipe repair, water leak detection, and ongoing plumbing protection.
Whether it’s a burst braided hose in Brighton, a leaking flexible tap connector in Glen Iris, or a mixer tap leak in Mornington, we respond quickly with the tools, parts and care to solve the problem completely—no stress, no mess.
No matter where you’re located in the Inner South East, Bayside or Peninsula corridor, our burst pipe plumbers offer precision, care, and fast response—backed by modern tools and time-tested plumbing expertise.
Need a burst pipe plumber in Carlton? Suspect a water pipe burst in Hampton? Have a leaking pipe in Mornington or emergency plumbing in Dandenong? Our Detect and Repair specialised plumbers have got your area covered.
Suburbs We Regularly Service In The Inner South East And Surrounds:
- South Yarra
- Prahran
- Carlton
- Toorak
- Malvern East
- Armadale
- Caulfield
- Glen Iris
- Hawthorn East
- Camberwell
- Kooyong
- Balwyn
- Ashburton
- Chadstone
- Carnegie
- Bentleigh
- Elsternwick
- Brighton
- Murrumbeena
- Carlton
- Burwood
Expanded Coverage Into The South-East Corridor And Bayside:
- Frankston
- Langwarrin
- Seaford
- Carrum Downs
- Chelsea
- Aspendale
- Patterson Lakes
- Dandenong
- Keysborough
- Springvale
- Noble Park
- Mornington
- Mount Eliza
- Mount Martha
- Safety Beach
- Dromana
- Rosebud
- Frankston South
- Skye
- Sandhurst
- Hastings
Book your way – Call us today!
“Thanks for finding our burst before it was too late. I don't know what we would have gone through if that had burst!" Kevin L
Frequently Asked Questions About:
Burst & Leaking Flexible Hose Plumbing
What are flexible water connectors or ezy-hookers?
Flexible water connectors — also known as ezy hookers, mixer tap tails or braided hoses—are short, stainless steel-covered hoses used to connect taps to your plumbing. They’re common under kitchen sinks, bathroom vanities and laundries—but they do degrade over time and can burst without warning.
Why do flexible hoses burst or leak suddenly?
Most flexible hoses burst due to age, water pressure spikes, corrosion, or poor installation. Once the internal rubber fails or the braided steel frays, the hose can split — causing sudden and severe flooding under full mains pressure.
How can I tell if a braided hose is about to fail?
Look for frayed steel braiding, rust at the joints, visible moisture, or bulging near the fittings. If your hoses are over 5 years old, they should be inspected — even if they look okay.
What’s the difference between a mixer tap leak and a hose leak?
A mixer tap leak usually means dripping from the tap spout or base. A hose leak is more dangerous — it happens below the sink where the flexible tails connect to the tap and water supply. Both need proper diagnosis to avoid flooding.
How quickly can you respond to a burst tap hose?
We offer fast response across Melbourne’s South East, Bayside and Peninsula areas. In most cases, we can attend the same day — especially for active leaks or burst hoses under sinks, vanities or basins.
Can I just replace the hose myself?
We don’t recommend it. Incorrect installation can lead to over tightening, twisting or incorrect sizing — all of which increase the risk of a future burst. We use compliant, high-quality parts and test fittings for reliability and safety.
Do you repair dripping or leaking taps too?
Yes. We handle all types of leaking taps, mixer tap cartridge replacements, and dripping shower taps. We can also assess whether internal pressure or failing tapware is causing excess stress on your flexible hoses.
What’s water hammer, and can it damage my hoses?
Water hammer is a loud banging or vibration in pipes when taps or appliances shut off suddenly. It creates pressure shockwaves that can stress or rupture flexible hose fittings. We can diagnose and correct water hammer during your inspection.
Do you offer preventative checks or full hose replacement?
Absolutely. If your home is more than 5 years old or you’ve never replaced your braided hoses, we can inspect and replace them proactively — before they burst. We also provide pressure checks and tapware servicing to reduce future risk.
Which Melbourne suburbs do you cover for hose and tap repairs?
We service Melbourne’s Inner South East, Bayside, Eastern suburbs, and the Frankston to Mornington Peninsula corridor. That includes areas like Brighton, Camberwell, Glen Iris, Mount Eliza, Mornington, Caulfield, Frankston and more.
Not sure if we cover your suburb? Just give us a call—we’re always happy to help.
Burst Flexible Hose? Leaking Tap? Don’t Wait Until It Floods.
Get it fixed properly—today.
Our Melbourne-based plumbers detect the issue, fix it with lasting materials, and help protect your home from future failures.
Whether it’s a leaking mixer tap tail, burst braided hose, or a suspected flexible pipe failure—we respond quickly, work cleanly, and make it right.
What you get
Accurate leak detection with no guesswork
Professional burst pipe repair, backed by experience
Honest advice and long-term protection
Rapid service across South East, Eastern Melbourne as well as Mornington Peninsula.
Proudly trusted by Melbourne homeowners for reliable plumbing repairs and peace of mind.