Melbourne Shower Leak Detection Specialists
We specialise in shower leak detection - pinpointing hidden water issues before they lead to serious damage.
Leaking Shower? We Find And Fix Your Bathroom Leaks.
A leaking shower might start as a few loose tiles or damp smells – but left unchecked, it can lead to hidden water damage, structural decay, mould growth, and expensive repairs. The problem? Shower leaks often don’t show their source on the surface.
That’s where professional shower leak detection becomes essential.
Our Melbourne-based leak detection specialists use targeted pressure tests, isolation methods, and moisture assessments to diagnose plumbing-related shower leaks. Whether it’s a leaking shower mixer tap, faulty waterproofing, or cracked waste pipes beneath the floor, we isolate the cause without guesswork or destructive trial-and-error.
🧰 What Makes Shower Leaks Tricky:
- They often leak slowly over time, causing invisible damage under tiles or behind walls.
- Showers combine both water supply and drainage plumbing, so multiple potential sources exist.
- Not all leaks are caused by plumbing – but our process helps rule it in or out with confidence.
✅ Clear Scope, Clear Next Steps
We focus solely on detecting plumbing-related shower leaks. Once our test results are in, we’ll walk you through the findings and discuss any plumbing repairs that may be needed. If the issue isn’t plumbing-related (like failed waterproofing), we’ll point you in the right direction – no sales pitch, no upselling, just clarity.
We test before we talk repairs – so you only fix what’s actually broken.
Shower Leaks Often Start Behind the Scenes
Why Showers Leak – Common Plumbing Faults
Shower leaks aren’t always easy to spot. What looks like a minor damp patch or a bit of movement in the tiles can be a sign of a much deeper problem. At Detect and Repair, our leak detection specialists have found that most shower-related water damage comes down to a handful of recurring plumbing faults – many of which stay hidden until they cause expensive repairs.
Here are the most common plumbing-related causes of shower leaks we uncover across Melbourne homes:
🔧 Worn or Failing Tapware
Old mixer taps or traditional shower taps can develop slow internal leaks that aren’t always visible from the front. Over time, the water tracks behind the wall and down into the subfloor or adjacent rooms.
🧵 Leaking Flexible Connectors
The braided flexible hoses connecting mixer taps to the water supply can split, f
ray, or burst – especially if under constant pressure or subjected to movement. These failures can flood a cavity quickly.
🧱 Damaged or Cracked Water Pipes
Pipes running behind shower walls or under bathroom floors can crack from age, corrosion, or poor installation. These types of concealed leaks are a major source of long-term water damage.
🌀 Waste Pipe Leaks
Poorly sealed or cracked shower waste pipes may only leak when the shower is in use, making them difficult to detect without specialist testing. These leaks often show up as damp walls, swollen cabinetry, or flooring damage.
🛠️ Poor Installations
DIY or rushed bathroom renovations often lead to hidden issues like incorrectly seated tapware, unsealed penetrations, or twisted pipework. These create slow leaks that worsen over time.
Most shower leaks we find aren’t visible from the bathroom – they’re behind tiles, inside walls, or under floors.
That’s why thorough testing matters
We Don’t Guess. We Test, Confirm and Repair What Matters
When it comes to suspected shower leaks, jumping to conclusions is risky. At Detect and Repair, we follow a proven three-step process to ensure the issue is properly identified, professionally repaired (if it’s plumbing-related), and safeguarded against future recurrence.
We Detect, Repair & Protect you’re shower and plumbing system.
✅ Step 1: Detect
We start with specialised leak detection testing to accurately confirm whether the leak is plumbing-related. This may include moisture detection, visual inspection of accessible areas, isolation testing of water feeds, or targeted pressure testing on concealed pipes.
We won’t start work until we know what’s going on—and you’ll have clear answers about the true cause of the leak.
🔧 Step 2: Repair
If the shower leak is caused by plumbing failure – such as a leaking pipe, failed waterproof tap body, cracked outlet, or deteriorated waste pipe – we carry out immediate plumbing repairs where practical.
If the issue lies outside plumbing (such as membrane failure or tile grout damage), we’ll advise accordingly and help you determine the next steps.
🔒 Step 3: Protect
Once repaired, we don’t just walk away. We’ll explain long-term plumbing improvements or preventative works to help avoid repeat damage – whether that’s upgrading your shower tapware, replacing ageing connectors, or reviewing your bathroom’s overall plumbing health.
We detect the root cause, repair the right way, and leave your shower protected for the long run.
We don’t just Locate shower leaks.
We help homeowners stay one step ahead of the next plumbing disaster.
No quick fixes. No half jobs. Just a clear path forward – delivered with care, clarity, and the right tools.
Get the Plumber you deserve!
Melbourne Shower Leak Specialists Who Focus on Clarity, Not Confusion
When you’re dealing with suspected water damage or mysterious dampness, the last thing you need is vague answers or guesswork. Our approach is simple: test properly, explain clearly, and only recommend plumbing repairs if they’re truly needed.
What Makes Our Shower Leak Detection Specialists Different?
✅ Plumbing-Focused Testing
We don’t offer cosmetic patch-ups or sell sealant systems. We’re licensed plumbers who investigate the actual plumbing behind your shower – including water pipes, waste pipes, tapware, and tile breaches caused by water pressure or pipework issues.
✅ On-the-Spot Answers
In most cases, we’re able to diagnose the issue on site, without needing to return or delay your repair. That means you can move forward with confidence – no waiting, no confusion.
✅ If It’s Not Plumbing, We’ll Tell You
We won’t sell you a plumbing repair if it’s not the cause. If your issue is structural or waterproofing-related, we’ll explain it clearly and help you decide what next steps make sense.
✅ Clear, Honest Communication
From our first conversation, we’ll let you know what to expect, how we test, and what the possible outcomes could be – no pressure, no upselling.
✅ We’re About Long-Term Protection
Once we identify and fix the issue (if it’s plumbing), we’ll help you understand how to avoid future leaks, protect adjacent rooms, and minimise water waste over time.
We’re not here to patch and dash – we’re here to detect, repair, and protect your home with transparency and purpose.
We’re here to help you get back to normal quickly – without stress, mess, or uncertainty.
Your Melbourne Service
Spot the Signs Before They Soak Your Home
Because most shower leaks are hidden, the damage often builds up silently – until it becomes costly. That’s why early leak detection is so important.
Our Melbourne-based plumbing and leak detection specialists are trained to spot the subtle signs before they become disasters.
🚨 Signs You Might Have a Shower Leak:
✅ Water pooling outside the shower
Even if it’s a small amount, frequent puddles after each shower can indicate a failing seal, waste pipe leak, or hidden tapware issue.
✅ Musty smells or dampness nearby
Persistent damp odours in the bathroom or adjacent rooms are often the first sign of a slow plumbing leak behind the scenes.
✅ Swollen skirting boards or cabinetry
Moisture from shower leaks tends to track along walls and floors, leading to swollen timber, bubbling paint, or cabinet damage.
✅ Cracked or loose tiles
Tiles shifting away from the wall or lifting from the floor may indicate long-term water exposure behind them.
✅ Stains on ceilings below
In multi-storey homes or apartments, shower leaks often reveal themselves as ceiling stains or sagging plaster in rooms below.
✅ Mould growth that keeps returning
If mould keeps appearing even after cleaning, it may be fed by a constant supply of moisture from a hidden plumbing leak.
If you’ve noticed any of these issues, it’s time to take the guesswork out of it. Our specialists can test and confirm the source – so you can fix it with confidence.
Trusted Leak Detection Specialists for Showers Across Melbourne’s Inner South East, Bayside, and Beyond
Whether you’ve discovered dampness outside your shower screen, water pooling near walls, or unexplained signs of moisture – our shower leak detection plumbers are ready to help across Melbourne.
We service homes across the Inner South East, Bayside, and Mornington Peninsula areas, offering precise plumbing diagnosis and on-the-spot repair options where possible. We’re trusted by homeowners who value straight answers, professional testing, and repairs that truly fix the problem.
From shower leaks in Glen Iris and Camberwell, to bathroom moisture issues in Hampton, Mount Eliza, or Frankston, our leak detection specialists carry the right tools and training to test, locate, and repair real plumbing issues.
Suburbs We Regularly Service In The Inner South East And Surrounds:
- South Yarra
- Prahran
- Carlton
- Toorak
- Malvern East
- Armadale
- Caulfield
- Glen Iris
- Hawthorn East
- Camberwell
- Kooyong
- Balwyn
- Ashburton
- Chadstone
- Carnegie
- Bentleigh
- Elsternwick
- Brighton
- Murrumbeena
- Box Hill
- Burwood
- Near Me
Expanded Coverage Into The South-East Corridor And Bayside:
- Frankston
- Langwarrin
- Seaford
- Carrum Downs
- Chelsea
- Aspendale
- Patterson Lakes
- Dandenong
- Keysborough
- Springvale
- Noble Park
- Mornington
- Mount Eliza
- Mount Martha
- Safety Beach
- Dromana
- Rosebud
- Frankston South
- Skye
- Sandhurst
- Hastings
- Near Me
Book your way – Call us today!
"Detect and Repair found the shower leak no one else could. Quick, clear, and no more water worries." — Walter G.
Common Questions About Shower Leaks, Testing, and Plumbing Repairs
How do I know if my shower is leaking?
Watch for damp patches, musty smells, water pooling near the shower base, or bubbling paint or plaster around walls and skirting. These are all red flags that something’s not right.
What’s involved in professional shower leak detection?
We carry out targeted testing of water pipes, tapware, shower outlets, and floor waste drains. Using our plumbing tools and experience, we isolate the issue and determine whether it’s a plumbing concern or something else.
Can you repair the issue if it’s plumbing-related?
Yes. If we find that the leak is coming from water pipes, taps, or waste pipes, we’ll offer on-the-spot repairs or a clear plan of action.
What if it’s not plumbing-related?
If our tests suggest the leak is due to failed waterproofing, cracked tiles, or other non-plumbing issues, we’ll provide clear advice. While we don’t carry out building repairs, we’ll explain your next steps.
How long does shower leak detection take?
Most tests can be done within 1–2 hours. We focus on minimising disruption while giving you accurate results.
Is this a destructive process? Will you need to remove tiles?
Not usually. Most detection tests are non-invasive. We’ll only suggest removing tiles or accessing behind walls if absolutely necessary – and only with your approval.
Is this service only for showers, or can you check other areas too?
We can also inspect bathrooms more broadly, including vanities, toilets, and baths – especially if you’re unsure where the moisture is coming from.
Do you offer shower testing for apartment buildings?
Yes, we regularly assist with leak detection in apartments, units, and multi-storey homes, where pinpointing the source is critical to avoid major water damage.
Do you test for waterproofing issues?
We can assess whether waterproofing might be a factor based on symptoms and test results. However, we specialise in plumbing-related leak detection and repair, not waterproof membrane replacement.
Do I need to book both leak detection and repair?
No. We’ll start with leak detection and testing – if repairs are required and fall within our plumbing scope, we’ll discuss options on-site.
✅ Suspect a Shower Leak? Let’s Test It the Right Way.
Shower leak causing damage to your property?
If you’re seeing signs of water damage around your shower – or just have a gut feeling something isn’t right – our Melbourne-based leak detection specialists are ready to help.
We carry out detailed shower leak testing to identify the real cause – then guide you on the best next steps. If it’s a plumbing issue, we can often repair it on the spot.
No rushed fixes. No upsells. Just clear answers and expert plumbing care.
📞 Speak with a friendly team member who’ll organise a licensed plumber to assess, test, and protect your bathroom — no pressure, no gimmicks, just help when you need it.
✅ Serving Melbourne’s South East, Greater Metro, and Mornington Peninsula areas.
Proudly trusted by homeowners for reliable plumbing repairs and peace of mind.
Contact Us
Ph:
Lic No.
Email:
Opening Hours
Mon – Fri 7:00 am to 8:30 pm
Sat – Sun 8:00 am to 6:00 pm
About Us
Areas of Service
Blog
About Us
Sitemap
Review Us
